Comprehensive Troubleshooting Guide for Samsung Dryer Error Codes

Is your Samsung front-load washer running smoothly, but your clothes dryer seems to be on the fritz? Don’t worry, we’ve got you covered. In this detailed guide, we will walk you through troubleshooting the error codes on your Samsung dryer. By following these steps, you may be able to diagnose and resolve the issue without the need for a costly repair technician. So grab your toolkit and let’s get started!

Resetting Your Dryer

Before we dive into specific error codes, it’s important to note that a simple reset can often do wonders for getting your dryer back up and running. Here’s what you need to do:
1. Unplug the dryer from the power outlet.
2. Wait at least 30 seconds before plugging it back in.
3. Sometimes, this quick reset is all it takes for the internal motherboard to reset and for your dryer to start functioning normally again.

Decoding Samsung Dryer Error Codes

Door Related Errors

• Error Code: do
• Clothes Dryer Problem: Door open

• Repair Steps:

  • Ensure the dryer door is firmly closed.
  • Clean the door switch/lock to remove any lint or residue.
  • Check for loose or damaged wire connections in the door lock/switch circuit.

• Error Code: dF

• Clothes Dryer Problem: Door circuit failure
• Repair Steps:
  • Check for loose or damaged wiring connections in the door/lock switch circuit.
  • Replace the wires or door lock/switch if necessary.

Excessive Drying Time Error

• Error Code: Od
• Clothes Dryer Problem: Excessive drying time
• Repair Steps:
  • Empty the lint filter.
  • Clean the moisture sensor inside the dryer drum.
  • Ensure dryer ducts and vents are clear of any obstructions.

Power Supply Error

• Error Code: FE
• Clothes Dryer Problem: Problem with power supply
• Repair Steps:
  • Test the voltage the dryer is receiving.
  • Replace the electronic control board if needed.

Temperature Sensor Errors

• Error Code: tS or tO
• Clothes Dryer Problem: Defective temperature sensor
• Repair Steps:
  • Test the resistance of the temperature sensor.
  • Replace the thermistor or wire harness as needed.

Heating Errors

• Error Code: hE or HE (Gas Dryer)
• Clothes Dryer Problem: Gas dryer heating error

• Repair Steps:

  • Check gas supply valve.
  • Inspect wiring connections on the gas valve coils.

• Error Code: hE or HE (Electric Dryer)

• Clothes Dryer Problem: Electric dryer heating error
• Repair Steps:
  • Check circuit breakers in your home’s electrical box.
  • Inspect wiring connections on the heating element.

Control Panel Errors

• Error Code: bE
• Clothes Dryer Problem: Stuck button on the control panel

• Repair Steps:

  • Press all buttons on the control panel to free the stuck button.
  • Replace the user interface control if necessary.

• Error Code: Et

• Clothes Dryer Problem: Control board failure
• Repair Steps: Contact a service technician to diagnose and replace the control board.

Conclusion

By understanding these common Samsung dryer error codes and following the recommended repair steps, you can save both time and money on unnecessary service calls. Remember to always prioritize safety and consult a professional if you are unsure about any repair procedures. With a bit of troubleshooting know-how, you can have your Samsung dryer back in working order in no time. Happy drying!